Digital twin services for machines, lines and products
A digital twin is a live model of a physical asset, fed by its own data. Modelcam builds digital twins from your CAD and PLM data and your plant signals, so engineers can see condition, predict failures and test changes before touching the line.
- For
- Manufacturers and machine builders
- Built from
- CAD, PLM, PLC and sensor data
- Runs
- In your network or in the cloud
- First step
- One-Week AI Assessment
- Main drive motorvibration within bandNormal
- Hydraulic unitoil temperature risingWatch
- Die clamp, station 3cycle time driftingWatch
- Feedermatches modelNormal
- Lubrication pumppressure below modelAct
What is a digital twin?
A digital twin is a digital copy of a real machine, line or product that stays connected to it. The geometry comes from CAD, the structure from the bill of materials, and the behaviour from live data.
| 3D CAD model | Simulation | Digital twin | |
|---|---|---|---|
| What it shows | Shape and structure as designed | Behaviour under assumed conditions | Behaviour of the real asset right now |
| Connected to live data | No | No | Yes, from PLCs, sensors and MES |
| Lifespan | Design phase | One study | The life of the asset |
| Used to | Design and manufacture | Test a design before building | Monitor, predict and test changes in operation |
Which kinds of digital twin does Modelcam build?
Three kinds, chosen by the question you need answered: a twin of one asset, of a whole line, or of the product you ship.
Asset twin
One machine or cell. Condition monitoring and early warning of failures for the equipment that stops the plant when it stops.
Line or process twin
A whole line with its flows and buffers. Test a new schedule, changeover or layout before you commit to it.
Product twin
The product in the field, tied to its as-built bill of materials. Service teams see the exact configuration they are about to work on.
What is the role of digital twins in predictive manufacturing?
The twin knows how the machine should behave, so it notices when it does not. That turns maintenance from a reaction into a plan.
- Predictive maintenance. Compare live readings with the model and flag drift before it becomes a stop.
- Virtual commissioning. Prove PLC logic against the twin before the machine is powered.
- What-if planning. Try a new product mix or shift pattern on the twin first.
- Operator training. Train on the twin, not on a running line.
- Energy and quality. See where energy goes and which settings produce scrap.
How does Modelcam build a digital twin?
In four steps. We start with one asset and one question, connect the data you already have, and add AI only once the twin matches reality.
Scope
Pick the asset and the question: downtime, scrap, energy or throughput.
Model
Bring in the CAD geometry and the bill of materials from Creo, SOLIDWORKS or Windchill.
Connect
Map PLC, sensor and MES signals to the parts they belong to.
Predict
Add AI that learns normal behaviour and warns when it changes.
Where does digital twin data stay?
Wherever you need it to. Plant data is sensitive, so the twin can run fully inside your network.
Inside your network
The modelcam AI engine runs the twin on-premise, with no outside AI service involved.
Built on your engineering data
Twenty-three years in CAD and PLM means the twin starts from a clean model and bill of materials. See PLM services.
Delivered by named engineers
Forward deployed engineers build the twin with your maintenance and controls teams.
Questions about digital twins
What is a digital twin in manufacturing?
A digital twin is a live digital model of a physical machine, line or product that is kept up to date with data from the real thing. Engineers use it to see current condition, predict problems and test changes before touching the plant.
What is the difference between a digital twin and a simulation?
A simulation runs on assumptions and stops when the study ends. A digital twin stays connected to the real asset, so it reflects what is happening now and keeps learning from new data.
What is the role of digital twins in predictive manufacturing?
The twin compares live sensor readings with how the machine should behave. When the two drift apart it flags the cause early, so maintenance is planned around production instead of after a breakdown.
What data do you need to build a digital twin?
Three things: the 3D CAD model and bill of materials, live signals from PLCs, sensors or the MES, and maintenance and quality history. We start with what you already have and add sensors only where the gaps matter.
Do we need new hardware?
Usually not much. Most plants already collect the signals. Where data cannot leave the site, the twin runs on the modelcam AI engine inside your network.
How long does a first digital twin take?
A first twin of one machine or cell is typically a matter of weeks, not months, because we scope it to a single question such as unplanned downtime on one asset.
How does a digital twin connect to PLM and CAD?
The CAD model and the PLM bill of materials give the twin its structure, so every sensor reading maps to a real part number. That is why companies with clean Creo and Windchill data get to a working twin faster.
Start with one machine and one question.
The One-Week AI Assessment finds the asset where a digital twin pays back first.
or email ai@modelcamtechnologies.com